Dentplus

Organopolysiloxane Dental Impression material 900ml

New type condensation silicone

Type o, high viscosity (ADA) No 19)

Extended researches in our laboratories as well as avant-garde technology resulted in manufacturing this exceptional product. It is a new type of condensation silicone with excellent characteristics of initial fluidity.

Apart from Dentplus, no other type of silicone presently available in market, is able to retain such a high fluidity during working time.

The final impression being so hard and dense prevents the possibility of deformation achieving at the same time the greatest possible detail using the double impression technique.

• Mucous compression is reduced during insertion in mouth
• During the double impression technique, Dentplus can be used as individual tray.
• Suitable for provisional applications, bites and study models
• Perfect elasticity
• Minimal deformation
• Excellent final hardness

Technical Data

• Working time from the beginning of mixing 1min.15sec
• Time in mouth 1min.15sec
• Consistence in mm (ISO) 33
• Breaking resistance 100%
• Resistance to the traction (on cm2) 18kg
• Resistance to the tearing (on cm2) 2,7kg
• Linear retraction after 1 hour 0,080
• Linear retraction after 24 hours 0.215

Although Dentplus is a very soft material, the final product after polymerization is hard and dense (the final hardness is 80 SHORE – A after 2 hours).

Package: 900ml

Used with Activator gel 60ml

Activator gel can also be used with Dentflex, Dentorans, Labor Plus.

Dentflex

A - Silicone Light Body Fast setting

New generation, very low viscosity, two component, hydrophilic A - Silicone with extremely long life.

Specially formulated for two stage technique (double impression).

Advantages

• High tear strength
• Excellent elastic recovery
• High dimensional stability
• Mixing ratio 1:1
• Hydrophilic
• Thixotropic
• Excellent reproduction of details
• Very good mechanical properties
• Low linear shrinkage
• No release of toxic substances during and after curing
• High resistance to inorganic chemicals and UV rays
• Good release properties with organic resins and gypsum

Technical Data

• Classification ADA 19 Low type I
• Classification ISO 4823 Type 3
• Colour Orange
• Dosage Base:Catalyst 1:1
• Mixing time automatic mixing
• Working time 1.30 min.
• Time in mouth 1.30min.
• Total time 3 min.
• Shore A Hardness at 24h (ASTM D 2240/C) approx.53
• Specific Gravity 23 C approx.1,37
• Linear Dimensional Change <-0,2%
• Strain in compression 3-5%
• Recovery for deformation (ISO 4823) approx. 99,8%

Package: Syringes 2X50ml + mixing tips